Несколько виртуальных WWW серверов на одном копьютере.

Конфигурирование веб-сервера (Настройки веб-сервера Apache, HTTPD)
Ответить
Аватара пользователя
Роман Торопов
Администратор
Сообщения: 141
Зарегистрирован: 24 мар 2008, 10:49
Откуда: г. Пермь
Контактная информация:

Несколько виртуальных WWW серверов на одном копьютере.

Сообщение Роман Торопов » 25 мар 2008, 13:36

Несколько виртуальных WWW серверов на копьютере.
Устанавливать несколько Apache на один копьютер нет необходимости.
Можно организовать несколько серверов на каждый IP адрес (сетевой интерфейс).
Для этого создайте файл с любым именем, с расширением *.conf в каталоге (к примеру virtual.conf), т.е.:
/etc/httpd/conf/vhost.d/virtual.conf

его содержание примерно такое:

Код: Выделить всё

NameVirtualHost 192.168.0.1:80

<VirtualHost 192.168.0.1:80>
    ServerAdmin ru@ru.ru
    DocumentRoot "/var/www2/html"
    Alias /icons/ "/var/www2/icons/"
    Alias /error/ "/var/www2/error/"
    ScriptAlias /cgi-bin/ "/var/www2/cgi-bin/"
    ServerName 192.168.0.1
    ErrorLog /var/log/httpd/local-error_log
    CustomLog /var/log/httpd/local-access_log common
<Directory "/var/www2/html">
    Options -Indexes FollowSymLinks MultiViews

    AllowOverride All

    <IfModule mod_access.c>
	Order allow,deny
	Allow from all
    </IfModule>

</Directory>
<Directory "/var/www2/cgi-bin">
    AllowOverride All
    Options ExecCGI
    <IfModule mod_access.c>
	Order allow,deny
	Allow from all
    </IfModule>
</Directory>
</VirtualHost>

Что будет соответствовать:
Установить виртуальный WWW-сервер на интерфейс с IP адресом 192.168.0.1
А локальные пути к файлам будут находиться по пути:
/var/www2/
Администратор виртуального хоста с мылом: ru@ru.ru
А так же логи этого сервера будут находиться в файлах:
/var/log/httpd/local-error_log
/var/log/httpd/local-access_log

Т.е. получится, что на один интерфейс будет один сервер, а на другой интерфейс будет другой сервер со своими файлами и настройками.

Аватара пользователя
Роман Торопов
Администратор
Сообщения: 141
Зарегистрирован: 24 мар 2008, 10:49
Откуда: г. Пермь
Контактная информация:

Re: Несколько виртуальных WWW серверов на одном копьютере.

Сообщение Роман Торопов » 25 мар 2008, 13:36

ну или вот:

Код: Выделить всё

#
### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at 
# <URL:http://httpd.apache.org/docs-2.0/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
NameVirtualHost 192.168.0.1:80
#Setenv VLOG 

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
<VirtualHost 192.168.0.1:80>
    ServerAdmin root@ingineer.ru
    DocumentRoot /var/www2/html
    ServerName linux.ingineer.ru
    DefaultLanguage ru
    AddCharset WINDOWS-1251 .cp-1251   .win-1251
    AddDefaultCharset WINDOWS-1251
    ErrorLog /var/log/httpd/linux.ingineer.ru-error_log
    CustomLog /var/log/httpd/linux.ingineer.ru-access_log common
<Directory /var/www2/html>
    Options -All -Multiviews
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>
<Directory "/var/www2/html">


    Options -Indexes FollowSymLinks MultiViews


    AllowOverride All

# Controls who can get stuff from this server.
    Order allow,deny
    Allow from all

</Directory>


<IfModule mod_include.c>
    <IfModule mod_dir.c>
	DirectoryIndex index.shtml
    </IfModule>
</IfModule>

<IfModule mod_dir.c>
    DirectoryIndex index.php index.html index.pl index.xml index.htm index.html.var index.cgi Default.htm default.htm
</IfModule>

AccessFileName .htaccess

<IfModule mod_authz_host.c>
    <FilesMatch "^\.ht">
	Order allow,deny
	Deny from all
    </FilesMatch>
</IfModule>
<IfModule mod_alias.c>
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL.  So "/icons" isn't aliased in this
    # example, only "/icons/".  If the fakename is slash-terminated, then the 
    # realname must also be slash terminated, and if the fakename omits the 
    # trailing slash, the realname must also omit it.
    # We include the /icons/ alias for FancyIndexed directory listings.  If you
    # do not use FancyIndexing, you may comment this out.
    Alias /icons/ "/var/www2/icons/"
    Alias /error/ "/var/www2/error/"

    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    ScriptAlias /cgi-bin/ "/var/www2/cgi-bin/"
    # ScriptAlias /protected-cgi-bin/ "/var/www/protected-cgi-bin/"
</IfModule>

<Directory "/var/www2/icons">
    Options -Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>

<IfModule mod_cgid.c>
    # Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
    # for setting UNIX socket for communicating with cgid.
    #Scriptsock            /var/run/cgisock
</IfModule>


<Directory "/var/www2/cgi-bin">
    AllowOverride All
    Options ExecCGI
    Order allow,deny
    Allow from all
</Directory>
</VirtualHost>


# --------------------------------------------------------------------------------------------------------------


NameVirtualHost 192.168.0.2:80
#Setenv VLOG 

<VirtualHost 192.168.0.2:80>
    ServerAdmin root@ingineer.ru
    DocumentRoot /var/www3/html
    ServerName forum.ingineer.ru
    DefaultLanguage ru
    AddCharset WINDOWS-1251 .cp-1251   .win-1251
    AddDefaultCharset WINDOWS-1251
    ErrorLog /var/log/httpd/forum.ingineer.ru-error_log
    CustomLog /var/log/httpd/forum.ingineer.ru-access_log common
<Directory /var/www3/html>
    Options -All -Multiviews
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>
<Directory "/var/www3/html">


    Options -Indexes FollowSymLinks MultiViews


    AllowOverride All

# Controls who can get stuff from this server.
    Order allow,deny
    Allow from all

</Directory>


<IfModule mod_include.c>
    <IfModule mod_dir.c>
	DirectoryIndex index.shtml
    </IfModule>
</IfModule>

<IfModule mod_dir.c>
    DirectoryIndex index.php index.html index.pl index.xml index.htm index.html.var index.cgi Default.htm default.htm
</IfModule>

AccessFileName .htaccess

<IfModule mod_authz_host.c>
    <FilesMatch "^\.ht">
	Order allow,deny
	Deny from all
    </FilesMatch>
</IfModule>
<IfModule mod_alias.c>
    Alias /icons/ "/var/www3/icons/"
    Alias /error/ "/var/www3/error/"
    ScriptAlias /cgi-bin/ "/var/www3/cgi-bin/"
    # ScriptAlias /protected-cgi-bin/ "/var/www/protected-cgi-bin/"
</IfModule>

<Directory "/var/www3/icons">
    Options -Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>

<IfModule mod_cgid.c>
    # Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
    # for setting UNIX socket for communicating with cgid.
    #Scriptsock            /var/run/cgisock
</IfModule>


<Directory "/var/www3/cgi-bin">
    AllowOverride All
    Options ExecCGI
    Order allow,deny
    Allow from all
</Directory>
</VirtualHost>



Аватара пользователя
Роман Торопов
Администратор
Сообщения: 141
Зарегистрирован: 24 мар 2008, 10:49
Откуда: г. Пермь
Контактная информация:

Re: Несколько виртуальных WWW серверов на одном копьютере.

Сообщение Роман Торопов » 25 мар 2008, 13:36

А это виндовый апач:

Код: Выделить всё

ServerType standalone
ServerRoot "d:/www"
PidFile logs/httpd.pid
ScoreBoardFile logs/apache_status
Timeout 300
KeepAlive On
MaxKeepAliveRequests 100
KeepAliveTimeout 15
MaxRequestsPerChild 0
ThreadsPerChild 50

Listen 192.168.0.36:80

#
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#
#BindAddress *

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run `apache -l' for the list of already
# built-in (statically linked and thus always available) modules in your Apache
# binary.
#
# Note: The order in which modules are loaded is important.  Don't change
# the order below without expert advice.
#
#LoadModule anon_auth_module modules/ApacheModuleAuthAnon.dll
#LoadModule cern_meta_module modules/ApacheModuleCERNMeta.dll
#LoadModule digest_module modules/ApacheModuleDigest.dll
#LoadModule expires_module modules/ApacheModuleExpires.dll
#LoadModule headers_module modules/ApacheModuleHeaders.dll
#LoadModule proxy_module modules/ApacheModuleProxy.dll
#LoadModule rewrite_module modules/ApacheModuleRewrite.dll
#LoadModule speling_module modules/ApacheModuleSpeling.dll
#LoadModule status_module modules/ApacheModuleStatus.dll
#LoadModule usertrack_module modules/ApacheModuleUserTrack.dll

#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
#ExtendedStatus On

Port 80
ServerAdmin root@ingineer.ru
ServerName ingineer.ru
DocumentRoot "d:/www/htdocs"
<Directory />
    Options FollowSymLinks
    AllowOverride None
</Directory>
<Directory "d:/www/htdocs">

#
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
    Options Indexes FollowSymLinks

#
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo", 
# "AuthConfig", and "Limit"
#
    AllowOverride None

#
# Controls who can get stuff from this server.
#
    Order allow,deny
    Allow from all
</Directory>

#
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
#
# Under Win32, we do not currently try to determine the home directory of
# a Windows login, so a format such as that below needs to be used.  See
# the UserDir documentation for details.
#
UserDir "d:/www/users/"

#
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index.  Separate multiple entries with spaces.
#
DirectoryIndex index.html

#
# AccessFileName: The name of the file to look for in each directory
# for access control information.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess files from being viewed by
# Web clients.  Since .htaccess files often contain authorization
# information, access is disallowed for security reasons.  Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files.  If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
#
<Files .htaccess>
    Order allow,deny
    Deny from all
</Files>

#
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#
#CacheNegotiatedDocs

#
# UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name.  With this setting off, Apache will
# use the hostname:port that the client supplied, when possible.  This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
#
UseCanonicalName On

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
TypesConfig conf/mime.types

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
#
<IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error.log

#
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog logs/access.log common

#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent

#
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog logs/access.log combined

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature On

#
# Aliases: Add here as many aliases as you need (with no limit). The format is 
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL.  So "/icons" isn't aliased in this
# example, only "/icons/"..
#
Alias /icons/ "d:/www/icons/"

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#
ScriptAlias /cgi-bin/ "d:/www/cgi-bin/"

#
# "d:/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "d:/www/cgi-bin">
    AllowOverride None
    Options None
</Directory>

#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
#

#
# Directives controlling the display of server-generated directory listings.
#

#
# FancyIndexing is whether you want fancy directory indexing or standard
#
IndexOptions FancyIndexing

#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions.  These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^

#
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif

#
# AddDescription allows you to place a short description after a file in
# server-generated indexes.  These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz

#
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes. 
#
# The server will first look for name.html and include it if found.
# If name.html doesn't exist, the server will then look for name.txt
# and include it as plaintext if found.
#
ReadmeName README
HeaderName HEADER

#
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing.  Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

#
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customisation directives above.
#
AddEncoding x-compress Z
AddEncoding x-gzip gz

#
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.  Note that the suffix does not have to be the same
# as the language keyword --- those with documents in Polish (whose
# net-standard language code is pl) may wish to use "AddLanguage pl .po" 
# to avoid the ambiguity with the common suffix for perl scripts.
#
AddLanguage ru .ru
AddLanguage en .en
AddLanguage fr .fr
AddLanguage de .de
AddLanguage da .da
AddLanguage el .el
AddLanguage it .it

#
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference.
#
LanguagePriority ru en fr de

#
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
#
# For example, the PHP3 module (not part of the Apache distribution)
# will typically use:
#
#AddType application/x-httpd-php3 .phtml
#AddType application/x-httpd-php3-source .phps

#
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
#
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
#
# To use CGI scripts:
#
#AddHandler cgi-script .cgi

#
# To use server-parsed HTML files
#
#AddType text/html .shtml
#AddHandler server-parsed .shtml

#
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#
#AddHandler send-as-is asis

#
# If you wish to use server-parsed imagemap files, use
#
#AddHandler imap-file map

#
# To enable type maps, you might want to use
#
#AddHandler type-map var

#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#
#MetaDir .web

#
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#
#MetaSuffix .meta

#
# Customizable error response (Apache style)
#  these come in three flavors
#
#    1) plain text
#ErrorDocument 500 "The server made a boo boo.
#  n.b.  the (") marks it as text, it does not get output
#
#    2) local redirects
#ErrorDocument 404 /missing.html
#  to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
#  N.B.: You can redirect to a script or a document using server-side-includes.
#
#    3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html
#  N.B.: Many of the environment variables associated with the original
#  request will *not* be available to such a script.

#
# The following directives disable keepalives and HTTP header flushes.
# The first directive disables it for Netscape 2.x and browsers which
# spoof it. There are known problems with these.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0

#
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
#
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0

#
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
#
#<Location /server-status>
#    SetHandler server-status
#    Order deny,allow
#    Deny from all
#    Allow from .your_domain.com
#</Location>

#
# Allow remote server configuration reports, with the URL of
#  http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#
#<Location /server-info>
#    SetHandler server-info
#    Order deny,allow
#    Deny from all
#    Allow from .your_domain.com
#</Location>

#
# There have been reports of people trying to abuse an old bug from pre-1.1
# days.  This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging 
# script on phf.apache.org.  Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#
#<Location /cgi-bin/phf*>
#    Deny from all
#    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>

#
# Proxy Server directives. Uncomment the following line to
# enable the proxy server:
#
#ProxyRequests On

#
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#
#ProxyVia On

#
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
#
#CacheRoot "d:/www/proxy"
#CacheSize 5
#CacheGcInterval 4
#CacheMaxExpire 24
#CacheLastModifiedFactor 0.1
#CacheDefaultExpire 1
#NoCache a_domain.com another_domain.edu joes.garage_sale.com

### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them.
# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# If you want to use name-based virtual hosts you need to define at
# least one IP address (and port number) for them.
#
#NameVirtualHost 12.34.56.78:80
#NameVirtualHost 12.34.56.78

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
#
#<VirtualHost ip.address.of.host.some_domain.com>
#    ServerAdmin webmaster@host.some_domain.com
#    DocumentRoot /www/docs/host.some_domain.com
#    ServerName host.some_domain.com
#    ErrorLog logs/host.some_domain.com-error_log
#    CustomLog logs/host.some_domain.com-access_log common
#</VirtualHost>

#<VirtualHost _default_:*>
#</VirtualHost>
#
#--- Start of News Factory Lite Setup ---
#
AddHandler cgi-script .cgi
Alias /nf/ "d:\www\News Factory Lite/public_html/"
<Directory "d:\www\News Factory Lite/public_html">
	Options Indexes ExecCGI
</Directory>
#--- End of News Factory Lite Setup ---


Ответить